IBM laptop batteries in use, activate and other operations, for various reasons, often in the details of the operation of an error, inadvertently unknowingly hurt your battery.
Now we would like to give a detailed analysis of two examples to illustrate the “operational details” the importance of.
Example: When the notebook AC Power Supply Department, and [the lenovo battery has been installed in the machine, and charging power than the start value (default is 96%)] after the shutdown, unplug the AC plug should be? After completion of the work shut down after a while the screen closed, it is easy to think that at this time has been off the success of the exchange as soon as conveniently plugs pulled out, not knowing at this time although the screen closed, but the motherboard power light (the circle in shape with the word Z light) remains to kindle, when the laptop is actually working, that is to say the machine needs to be the power supply at this time; if Unplug the AC plug at this time, notebooks will be the exchange of power from the state immediately to the state of battery-powered , no reason to use the battery a few seconds, so although it seems less than the number of electricity, but to speed up the battery faster fall to set the value of the initial charge of electricity, thereby reducing the use of cycle rechargeable laptop battery, affecting the life of the battery . AC Plug not pulled back, night out then? When the motherboard power indicator goes out (the battery status indicator still kindle), do not unplug the AC plug, power loss due to the motherboard, the power management system stops running out of control, the battery in the battery-management chip interface circuit, composed of about 5 seconds will be automatically transferred to “shut down state-of-charge”, when the battery status indicator light to kindle a constant, trickle charge the battery Department, so after the shutdown delay in the exchange of plugs will be pulled out for no reason to on the power> 96% of the battery for a short time to charge, and you hurt the battery. [Not completely run out of power before (that is, power in the 5 ~ 100%), not to charge batteries, or will be used to shorten the charge cycle, increased number of charge cycles and affect battery life. ]
Integrated above, the correct method of operation is: In addition to the lenovo laptop battery status indicator, the bottom of the screen all the indicator light turns off, unplug the AC plug that with (not later than 5 seconds), the exchange of plug pulled out after about 5 seconds, the battery status indicator light goes out automatically.
According to the above analysis we can see that the exchange of power supply have been used, the intent is to minimize the use of batteries, rechargeable lenovo batteries and prolong the use of cycles; and as a result of defects in the operation of the details, “unfinished, anti-Qing harmed”; “operation details “We can thus see the importance.
Example Two: When using the AC power supply, the AC adapter AC input and DC output plugs Plug and Play (dumping) the operation of the order in which they are particular about the details of. The correct method of operation is: first AC adapter DC output plug into the notebook’s power jack, then plug into 220V AC input AC power outlet; and should be unloaded first when the AC input plug unplug, DC output plug and then pull out. If the plug (unloaded) to reverse the order of the time, the Agency will be no-load AC adapter,and AC adapter is not allowed to empty the state Department for its work on the pulse, and no-load when the switch transformer windings will have very high anti-peak voltage breakdown, such as IC, voltage-sensitive components such as capacitors. Although the AC adapter has been set up its no-load protection circuit, but the design should take account of other problems, such protection circuits of the protective effect is very limited; Department when the AC adapter when no-load state may be damaged.
From the above analysis we can understand that in any of the details of the operation are so important, allows a single vague and perfunctory; that big point, this is what we usually talk about the meticulous nature of science and technology.To this end, I think I need to write down some rules on the battery-operated to make appropriate changes to the text, sorting; for your reference in order to draw attention to the details of the operation; at the same time called upon the teachers and supplementary criticism. Increase due to allocation constraints, can not be below Another example of the above example as a detailed analysis, this point also please forgive me.
Activated to deal with:
Following activation of the batteries needed to deal with:
1. Just the opening of the new lenovo battery.
2. A result of a long time do not use batteries, storage batteries Department to leave the computer, and is re-enabled when the battery.
3. A long time do not use the battery from the notebook computer or laptop out of storage back-up (more than two or three months), is re-enabled when the battery.
Activation of the cells the way to deal with:
Activation of chemical substances within the cell, to maximize battery performance, need to repeat the charge and discharge of the battery (fully charged and then fully discharge) three times. The so-called fully charge and discharge means: the normal boot so that the lenovo laptop battery consumption to 3% of battery power (preferably a depletion, but also to power consumption can be divided into several times, but the interval should not be too long), and then the battery must be shut down immediately 12 hours charging.
Here stressed the need to immediately charge to the batteries because the battery will be carried out even without the use of self-discharge, when the battery to 3% of electricity consumption, at this point in time if battery charge, can easily result in the phenomenon of self-discharge over-discharge battery to the detriment of batteries, lithium batteries have been discharged is a big taboo.
Activated to deal with battery charge, the machine must be turned off Department. If the Department to wait for the machine, hang and so on, and when the charge to 3 ~ 4 hours after the green battery status indicator light is no longer beating, the machine will automatically stop charging the lenovo battery, so that can not be fully charged battery. To 3% when the discharge of electricity, the machine will automatically enter the sleep state, at this point should be to start the machine, the machine to start the process of shutting down the bottom left of the screen click the button, the machine shutdown.
If the operator has mastered all the details well, and the quality of your battery and there is no problem, you can activate the battery well of chemical substances, to maximize the performance of the battery, the battery is basically normal in the future every time the use of can charge to 100%.
Use of questions:
Battery is a kind of “consumables”, the battery depends on the wear and tear when you use the battery to the correctness of the operation, operation mode, operating frequency, the work of the ambient temperature, inventory time (of the battery is not used), such as factor .
1. The number of battery charge and discharge is directly related to battery life, lithium batteries in general charge and discharge frequency of only about 400 ~ 600 times, but also improved the product 800 times, once for each battery charge to the end of the use of a step forward. (When below 85% of the electricity to recharge the lenovo laptop battery, will be recorded and an additional number of charge cycles.)
To this end, greater than the battery when the battery power management process by setting the charging start value (default is 96%), and you have 220V current places where AC power, should make full use of AC power to minimize battery number of charge cycles in order to extend battery life.
Batteries do not need at this time away from the machine because the boot will not charge for the electricity than the start value (default is 96%) to recharge the battery. But even so, if you are a long-term use of AC power and battery rarely used, it is recommended the battery is removed from the machine to compare because notebooks have a long run-time heat will cause some harm to the battery. It should be noted that this is only from the perspective of the battery maintenance to discuss it, and in actual operation you must be based on your needs to make trade-offs. In such cases due to the exchange once the power supply, you have not saved the data support the absence of cell loss, and, if the moment in power, you just access the hard disk drive and other data, this sudden there is no battery power due to the support of the machine may harm your equipment, this was a loss, the user must make trade-offs. In addition to drawing attention to is this: When you make a system backup, system recovery or create recovery CD, you have fully charged battery must be installed on the machine, and the use of reliable operation of AC power boot.
2. When the power for 3 to 5%, the battery should be given, because when the battery power dropped to 1%, the battery discharge curve of the state have been bending Department of the internal resistance of the leakage has been significantly smaller than normal, since the discharge current is also larger than normal, the phenomenon of self-discharge batteries can cause damage to cells and batteries have been discharged. Charge when the machine may be shutdown, suspend any state, can also side by side filling.
Must be a full charge, otherwise they will damage the battery. This is based on the necessary and sufficient to avoid shortening the cycle with increased number of charge cycles and shorten the battery life; and not as a result of “Memory features” problem, lithium batteries do not like nickel-cadmium batteries and nickel-hydrogen batteries have “memory characteristics”, lithium batteries do not have “memory characteristics. ”
Office machinery, such as charging shutdown or hibernation, when the charge to 3 ~ 4 hours after the green battery status indicator light is no longer beating, the time has reached 100% of electricity should be a timely manner to prevent removal of AC power plug to charge the battery too and harm the battery.
Office machinery, such as waiting time charge, or hang side by side the state of charge, when charging to 3 ~ 4 hours after the green ibm laptop battery status indicator light is no longer beating, the battery state of charge will automatically exit.
Charging process would be carried out in fast charge when the battery status indicator light yellow (Always), filling a certain value to a small current into the slow trickle charge when the battery status indicator flashes of color become green ; has been after a 100%, it becomes green (Always) the. Lithium battery charging process is the way of constant pressure to start charging voltage will soon stabilize, and the current is getting smaller and smaller.
3. Not completely run out of power before (that is, power in the 5 ~ 100%), not to charge the battery, otherwise they will be used to shorten the charge cycle and increase the number of charge cycles shorten battery life.
When the electricity charge for the 5% start value (default is 96%) should be used when the battery work, so the use of AC power adapter for charging on the battery (side by side the state of charge).
4. When the electricity for charging start value (default is 96%) ~ 100% or out of the battery from the machine, use the switched AC power adapter, AC power adapter to use when you put the AC power adapter DC output plug into the machine, and then plug into AC power outlet on 220V ~; unloaded when the AC power adapter should be first and then unplug the AC power plug from the machine, unplug the AC power adapter DC output plug . Otherwise you may damage the equipment.
Use AC power adapter, the [ibm battery has been installed in the machine, and charging power than the start value (default is 96%)] when the AC power plug into 220V ~ socket outlet, but the battery state of machine instructions the former has yet to kindle lights (Note: during which time about 5 seconds), please press the power button to boot a timely manner; off or enter hibernation, apart from the green battery status indicator light is now all the other things out, please promptly from 220V ~ Unplug the AC power outlet plug (not later than 5 seconds), AC power plug pulled out after about 5 seconds, the green battery status indicator goes out; otherwise would have been charging the battery and damage caused by batteries. Shutdown state due to AC power adapter is still non-discharge state, loss of electricity due to the motherboard, the power management system stops running out of control, the battery’s power management chips from the interface circuit composed of about 5 seconds after will automatically turn “off state-of-charge”, and to charge the battery. (At this point a constant kindle battery status indicator, battery trickle charge Department) If necessary, do not unplug the machine from the AC power adapter’s DC output plug, when the battery through AC power adapter will not reverse discharge.
If the order to suspend work or suspend the machine to enter the wait state, not from 220V ~ Unplug the AC power outlet plugs; therefore still power supply when the machines to maintain. (Not recommended to enter a long time to wait for the machine or suspend state, to care for your machine.)
5. IBM in ThinkPad notebook computers information technology related indicators identified in the “battery life” is a vendor-specific conditions in the measured, the indicators used in our normal notebook can not be achieved under the conditions of the , for example: information technology-related indicators identified in the “battery life” for 4 hours, in normal use can only get about 3.5 hours of battery power supply. If you are far less than, but still in warranty, come contact IBM.
Maintenance and storage
1. If the battery a longer period of time (several months) do not, should be removed to preserve back-up machine. About every one and a half months on a ibm laptop battery charge-discharge and finishing in order to improve the state of your battery to increase battery capacity.
2. If the batteries do not have a long time, power should be set to 30 ~ 50% after the storage, it is recommended to charge the battery about once a year, and its power set to 30 ~ 50%, in order to prevent over-discharge and battery damage.Battery power will be set to 30 ~ 50% of the specific method of operation as follows: When the battery power more than 50%, the power consumption can boot to 30 ~ 50%. If the power consumption of less than 30% of power to boot to 3%, then charge to 100% power and then boot to be 30 ~ 50%.
3. Not to temperature and battery on a cold environment, the battery performance will be temporarily reduced. Department should be the preservation and storage of the state of standby battery placed in the lower temperature for the batteries, the best temperature range is about 10 ~ 20 degrees Celsius.
Start value adjustments on the charge
Set start value charge, click the system tray icon in the plug (when you boot using the AC) or white battery icon (when you boot using the battery) / select Improve Battery Health / modify Start charging when below values. (If the system tray icon is no power plug, according to the following steps: Start / All Programs / ACCESS IBM / BATTERY MAXIMISER WIZARD, three “NEXT”, to STEP 3: VIEWING BATTERY STATUS / in the lower left-hand corner “SHOW BATTERY MAXIMISER GAUGE ON TASKBAR “box in front of select / and then” NEXT “to” complete “)
Do not extend the necessary and sufficient for the deliberate use of cycle changes significantly by the lenovo battery management process set start value of the charge; because when you set up to charge a low start value (for example, 80%), though the battery with AC power adapter to use the “necessary and sufficient to use cycle” may take up to three or four months, but when using the battery is bound to have to deal with their re-activated, otherwise the battery status and capacity of the poor. This increased the number of charge cycles and shorten the battery life. Furthermore the battery takes about one and a half months each for a discharge and recharge finishing, and that because of charge-based low start value (for example, 80%) after extended use of the charge cycle will be even more meaningless.
After the battery fully charged and the phenomenon of self-discharge to 96% decline in electricity consumption generally last for about 50 days, while the battery is just about every one and a half months to be a discharge and recharge finishing, it is apparent that, IBM is our charge from the default start value of 96% is some truth in this. However, with the aging batteries, the battery fully charged due to the phenomenon of self-discharge capacity fell to 96% the time required may be shortened, at this time we will need to charge slightly lower start value, so the time just a month and a half about.
If you often need to live in the office and equipment between the “two places” bustle, in the office with AC adapter power supply operation, and in the equipment used at the scene to operate battery-powered, it is recommended you start value is set to charge 6%; This will reduce the charge to avoid the increase with cycle number of charge cycles and shorten the lenovo battery life; and will not be affected due to caring for the battery of the mobile edge of the notebook.
Please note that the text is limited to the issues discussed in the IBM ThinkPad notebook, and other brands of machines in this article for reference only, since machines of different brands, and its system of power management and control procedures, as well as batteries battery management, monitoring procedures are not the same because of .
Attachment:
The number of available methods of charging:
Please click the system tray icon in the plug (when you boot using the AC) or white battery icon (when you boot using the battery) / BATTERY INFORMATION / STATUS DETAIL / CYCLE COUNT charging that the number.If the system tray icon is no power plug, according to the following steps:
Start / All Programs / ACCESS IBM / BATTERY MAXIMISER WIZARD .Three consecutive “NEXT” To STEP 3: VIEWING BATTERY STATUS / in the lower left-hand corner “SHOW BATTERY MAXIMISER GAUGE ON TASKBAR” box and then “NEXT” to “complete”